Equipment

10% off SKUTT Kilns with FREE Shipping!

Finally, an electric kiln line designed specifically for volume production and fast turnaround of high mass loads. It has the power and industrial components to go straight to Cone 10 with a full load of tile or stoneware – no slow struggling to reach the final temperature. The standard KilnMaster controller gives you the options of Cone Firing, or selecting your own 8-segment Ramp/Hold firing programs. The combination of direct wiring, heavy duty elements, connectors and relays, plus traditional Skutt stainless steel and firebrick construction results in a kiln that will last for years of constant use. Among the most powerful on the market today, the line was designed at the request of Skutt customers.

Standard Features

The Skutt KM-1227PK Single Phase kiln include the KilnMaster controller built in. Other standard features include:

• 2 year limited warranty, elements excluded

• Encapsulated Type K thermocouple

• Mercury Relays
• Industrial gauge wiring
• Compression connectors on feeder wires
• Larger, swing away, air cooled switch box
• Multi-sided design
• Stainless steel jacket
• Sectionalized construction
• Two lift handles on each section
• Sealed, dust-free lid with full-floating hinge
• Three types of exposed, pinned elements for optimum balance
• Reversible top and bottom slabs
• Stand included
• Peep plugs

• UL listing

DON'T FORGET TO ORDER AN ENVIRO-VENT!!!!

 

This shelf kit comes with eight 5/8" half shelves & a large post assortment to fit Skutt kiln 1027.

This shelf kit comes with one 5/8' full shelf & one 5/8" half shelf & a post assortment to fit Skutt kiln 609.

A full refractory kit for your new e28S kiln. It features six 26in. half shelves,  six each 1/2", 1", 2", 4", 6", 8" square posts,  hi-temp gloves, dark viewing glasses and five pounds of cone 10 kiln wash.

For use with Envirovent 2 for venting large oval kilns or multiple kilns.

QUALITY VENTING
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent
them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the
EnviroVent 2 also improves the fi ring atmosphere in the kiln while it is protecting you from the odorous fumes
that can be emitted from certain clay bodies and glazes when they are fired.

Here's How It Works
A designated number of holes are drilled in the lid and floor of the kiln either in the factory or on location. A spring loaded plenum cup (see diagram) is placed under the kiln and tensioned between the floor of the kiln and the floor under the kiln. The holes in the floor of the kiln are drilled in a tight pattern so the plenum cup can cover them all. The other end of the cup is connected by 3" ducting to a fan which is generally mounted on the wall. On the opposite end of the fan the air is ducted through the wall to the outside air.   The plenum cup has 3 additional holes from which it draws room temperature air to mix with the heated air from the kiln. This serves 2 purposes. Since the kiln air is mixed with cooler room air the air coming out of the end of the vent is never hotter than an average hair dryer. Secondly, the holes in the plenum cup are sized to reduce the vacuum on the kiln chamber so only a small amount of air is moving through the kiln. This ensures the firing time is not affected and the ware is not at risk.