Kiln Accessories

Often referred to as bars, these stilts are 4" in length. Can be fired to Cone 10. Can be placed in any configuration under odd shaped pieces during firing.

The largest star stilt offered. 18 points help hold up large, wide pieces. Can be fired up to Cone 10.

Ideal for moderately large forms, these stilts have 6 points. Can be fired to Cone 10.

Six points in these stilts offer extra support. Can be fired to Cone 10.

Additional wires for your Roselli Bead Rack.

A Two piece horizontal bead rack with 4 thick wires included. Suitable for low and high-fire.

Most popular sized stilt for the classroom. Can be fired to Cone 10.

2 3/4" span between 3 points. Can be fired to Cone 10.

Smallest little stilt you ever did see. 1/4" span on 3 pins. Can be fired to Cone 10.

1 1/2" span across 3 pins. Can be fired to Cone 10.

2 1/4" span across 3 pins. Can be fired to Cone 10.

2in.x2in.x1in. Hi Temperature Kiln Post

2in.x2in.x12in. Hi Temperature Kiln Post

2in.x2in.x2in. Hi Temperature Kiln Post

2in.x2in.x4in. Hi Temperature Kiln Post

2in.x2in.x8in. Hi Temperature Kiln Post

13x6 1/2x5/8in. Half Round Shelf
These shelves are made of cordierite and are good up to cone 8. If firing above cone 8, use the Acme Marls kiln shelves to avoid severe warping.

16x5/8in. Full Round Shelf
These shelves are made of cordierite and are good up to cone 8. If firing above cone 8, use the Acme Marls kiln shelves to avoid severe warping.

21x10 1/2x3/4in. shelf
These are affordable, top quality, durable kiln shelves. Don't warp or crack. They contain 12% more alumina that regular cordierite shelves. The are good to cone 11. Not for  wood or salt firing.

KILN SHELVES 21" OR LARGER CANNOT BE SHIPPED UPS/FED EX. THEY MUST BE SHIPPED ON A PALLET OR PICKED UP!

26 1/2x13x3/4in.  half round shelf
These are affordable, top quality, durable kiln shelves. Don't warp or crack. They contain 12% more alumina that regular cordierite shelves. They are good to cone 11. Not for  wood or salt firing.
KILN SHELVES 21" OR LARGER CANNOT BE SHIPPED UPS/FED EX. THEY MUST BE SHIPPED ON A PALLET OR PICKED UP!

This shelf kit comes with eight 5/8" half shelves & a large post assortment to fit Skutt kiln 1027.

This shelf kit comes with one 5/8' full shelf & one 5/8" half shelf & a post assortment to fit Skutt kiln 609.

A full refractory kit for your new e28S kiln. It features six 26in. half shelves,  six each 1/2", 1", 2", 4", 6", 8" square posts,  hi-temp gloves, dark viewing glasses and five pounds of cone 10 kiln wash.

For use with Envirovent 2 for venting large oval kilns or multiple kilns.

QUALITY VENTING
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent
them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the
EnviroVent 2 also improves the fi ring atmosphere in the kiln while it is protecting you from the odorous fumes
that can be emitted from certain clay bodies and glazes when they are fired.

Here's How It Works
A designated number of holes are drilled in the lid and floor of the kiln either in the factory or on location. A spring loaded plenum cup (see diagram) is placed under the kiln and tensioned between the floor of the kiln and the floor under the kiln. The holes in the floor of the kiln are drilled in a tight pattern so the plenum cup can cover them all. The other end of the cup is connected by 3" ducting to a fan which is generally mounted on the wall. On the opposite end of the fan the air is ducted through the wall to the outside air.   The plenum cup has 3 additional holes from which it draws room temperature air to mix with the heated air from the kiln. This serves 2 purposes. Since the kiln air is mixed with cooler room air the air coming out of the end of the vent is never hotter than an average hair dryer. Secondly, the holes in the plenum cup are sized to reduce the vacuum on the kiln chamber so only a small amount of air is moving through the kiln. This ensures the firing time is not affected and the ware is not at risk.

QUALITY VENTING
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent
them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the
EnviroVent 2 also improves the fi ring atmosphere in the kiln while it is protecting you from the odorous fumes
that can be emitted from certain clay bodies and glazes when they are fired.

Here's How It Works
A designated number of holes are drilled in the lid and floor of the kiln either in the factory or on location. A spring loaded plenum cup (see diagram) is placed under the kiln and tensioned between the floor of the kiln and the floor under the kiln. The holes in the floor of the kiln are drilled in a tight pattern so the plenum cup can cover them all. The other end of the cup is connected by 3" ducting to a fan which is generally mounted on the wall. On the opposite end of the fan the air is ducted through the wall to the outside air.   The plenum cup has 3 additional holes from which it draws room temperature air to mix with the heated air from the kiln. This serves 2 purposes. Since the kiln air is mixed with cooler room air the air coming out of the end of the vent is never hotter than an average hair dryer. Secondly, the holes in the plenum cup are sized to reduce the vacuum on the kiln chamber so only a small amount of air is moving through the kiln. This ensures the firing time is not affected and the ware is not at risk.

This Pyrometer comes with a Type K thermocouple, thermocouple mounting block, 5 feet of thermocouple wire, and a pyrometer flange for mounting the thermocouple to the kiln.  The Pyrometer comes with a case that can be mounted to the wall. It also has a flip out back so that it can be set on a table or shelf.  Since it is “Dual Input”, you can purchase an additional thermocouple package and monitor two kilns. It even remembers the minimum and maximum temperatures recorded in a firing. It is rated to Cone 10 with a plus or minus 0.4% of reading accuracy.