Kilns

10% off SKUTT Kilns with FREE Shipping!

Finally, an electric kiln line designed specifically for volume production and fast turnaround of high mass loads. It has the power and industrial components to go straight to Cone 10 with a full load of tile or stoneware – no slow struggling to reach the final temperature. The standard KilnMaster controller gives you the options of Cone Firing, or selecting your own 8-segment Ramp/Hold firing programs. The combination of direct wiring, heavy duty elements, connectors and relays, plus traditional Skutt stainless steel and firebrick construction results in a kiln that will last for years of constant use. Among the most powerful on the market today, the line was designed at the request of Skutt customers.

Standard Features

The Skutt KM-1227PK Single Phase kiln include the KilnMaster controller built in. Other standard features include:

• 2 year limited warranty, elements excluded

• Encapsulated Type K thermocouple

• Mercury Relays
• Industrial gauge wiring
• Compression connectors on feeder wires
• Larger, swing away, air cooled switch box
• Multi-sided design
• Stainless steel jacket
• Sectionalized construction
• Two lift handles on each section
• Sealed, dust-free lid with full-floating hinge
• Three types of exposed, pinned elements for optimum balance
• Reversible top and bottom slabs
• Stand included
• Peep plugs

• UL listing

DON'T FORGET TO ORDER AN ENVIRO-VENT!!!!

 

An excellent studio sized kiln. At 3.3 cubic feet this kiln delivers true cone 10 performance without big electric bills to match. The SINGLE wall construction consists of 3in. of insulating brick, a stainless steel jacket, and a stainless ateel stand. This kiln also features an element in the floor for even firing, a digital controller, and a 2 year warranty for peace-of-mind.

This kiln has an 18" interior diameter and a 22" depth.

Free Shipping in Continental US!!!

ideal for beginners, apartment dwellers, and those testing glaze... 

The KS-609 is ideal for beginners, apartment dwellers, and those tes...sting glazes, porcelain and clay bodies. Even though small in size, it has the quality features of larger kilns, including a Dawson Kiln-sitter. Operates on 115V, 20 amp circuit, which means you can use it just about anywhere.

10% off SKUTT Kilns with FREE Shipping!
15% off if picked up at Mudworks!!!

Sometimes called the energy saver the KM 1027-3 is known for its ease in reaching cone 10. With it's 3 inch fire brick it is able to reach cone 10 in 240 or 208 volt single or 3 phase time and time again. The KM 1027-3 firing chamber at 6.4 cubic feet provides plenty of room for larger stoneware or porcelain loads. The addition of the Skutt EnviroVent will help get the most from the kilns automatic firing capabilities. Also available in 3 phase models.

Electrical Requirements
240 Volts 48 Amps 11520 Watts
208 Volts 48 Amps 9980 Watts
Copper Wire Size: 6
Breaker Size:       60
NEMA Receptacle Configuration: 6-50

10% off SKUTT Kilns with FREE Shipping!
15% off if picked up at Mudworks!!!

This is the perfect automatic electric kiln for high production, with nearly 10 cubic feet of loading capacity. For those who fire the same program for many loads, you need simply to load and start one of your six stored programs, and go back to work on your next batch. The KilnMaster will handle all the firing details with truly superhuman precision, ensuring that you will get superb consistency, load after load. If your 1227-3 is fitted with a Skutt EnviroVent, you can plug all the peepholes, program a Delay to start your firing at night, and be there for shut-off and unloading the next morning. You get more sleep, and much more production. Available in three phase models.

Electrical Requirements
240 Volts 48 Amps 11520 Watts
208 Volts 48 Amps 9980 Watts
Copper Wire Size: 6
Breaker Size:       60
NEMA Receptacle Configuration: 6-50

QUALITY VENTING
The EnviroVent 2 is a Downdraft Ventilation System designed to extract fumes from your electric kiln and vent
them outdoors before they have a chance to enter the room. Because it is a DownDraft Ventilation System the
EnviroVent 2 also improves the fi ring atmosphere in the kiln while it is protecting you from the odorous fumes
that can be emitted from certain clay bodies and glazes when they are fired.

Here's How It Works
A designated number of holes are drilled in the lid and floor of the kiln either in the factory or on location. A spring loaded plenum cup (see diagram) is placed under the kiln and tensioned between the floor of the kiln and the floor under the kiln. The holes in the floor of the kiln are drilled in a tight pattern so the plenum cup can cover them all. The other end of the cup is connected by 3" ducting to a fan which is generally mounted on the wall. On the opposite end of the fan the air is ducted through the wall to the outside air.   The plenum cup has 3 additional holes from which it draws room temperature air to mix with the heated air from the kiln. This serves 2 purposes. Since the kiln air is mixed with cooler room air the air coming out of the end of the vent is never hotter than an average hair dryer. Secondly, the holes in the plenum cup are sized to reduce the vacuum on the kiln chamber so only a small amount of air is moving through the kiln. This ensures the firing time is not affected and the ware is not at risk.

F

Freedom kilns are a select series of kilns built with 3" brick and are equipped with the 12-key V6-CF electronic controllers.  The 23", 25", and 28" Freedom kilns are equipped with counter weight lid system for easy opening and closing of kiln lid.  Every Freedom kiln comes with its own Freedom Kit, an emergency repair kit filled with parts with a value over $100.00, furniture kit with a a free 33 assorted stilt package, and VentMaster.

Freedom 2323 (H for high temperature) equipped with electronic controller
Model - F2323HE/240 or 208v
Inside Dimensions: 23 3/8" wide x 22 ½" deep, fires to cone 10/2350°F
Model comes with counterweight lid system, stand, three peephole plugs, instruction manual, warranty card, and Freedom Kit. Two-year warranty.

Free Shipping!

Freedom kilns are a select series of kilns built with 3" brick and are equipped with the 12-key V6-CF electronic controllers.  The 23", 25", and 28" Freedom kilns are equipped with counter weight lid system for easy opening and closing of kiln lid.  Every Freedom kiln comes with its own Freedom Kit, an emergency repair kit filled with parts with a value over $100.00, furniture kit with a a free 33 assorted stilt package, and VentMaster.

Freedom 2823 (H for high temperature) equipped with electronic controller
Model - F2823HE/240 or 208v
Inside Dimensions: 28 ¼ " wide x 22 ½" deep, fires to cone 10/2350°F
Model comes with counterweight lid system, stand, three peephole plugs, instruction manual, warranty card, and Freedom Kit. Two-year warranty.

Free Shipping!

Freedom kilns are a select series of kilns built with 3" brick and are equipped with the 12-key V6-CF electronic controllers.  The 23", 25", and 28" Freedom kilns are equipped with counter weight lid system for easy opening and closing of kiln lid.  Every Freedom kiln comes with its own Freedom Kit, an emergency repair kit filled with parts with a value over $100.00, furniture kit with a a free 33 assorted stilt package, and VentMaster.

Freedom 2527 (H for high temperature) equipped with electronic controller
Model - F2527HE/240 or 208v
Inside Dimensions: 37" wide x 25" front-to-back x 27" deep, fires to cone 10/2350°F
Model comes with counterweight lid system, stand, three peephole plugs, instruction manual, warranty card, and Freedom Kit. Two-year warranty.

Free Shipping!

e18T

e28S

A full refractory kit for your new e23S kiln. It features one 21in. full shelf, four 21" half shelves , six each 1/2", 1", 2", 4", 6", 8" square posts,  hi-temp gloves, dark viewing glasses and five pounds of cone 10 kiln wash.