10% off SKUTT Kilns with FREE Shipping!
Standard Features
The Skutt KM-1227PK Single Phase kiln include the KilnMaster controller built in. Other standard features include:
2 year limited warranty, elements excluded
Encapsulated Type K thermocouple
UL listing
DON'T FORGET TO ORDER AN ENVIRO-VENT!!!!
ideal for beginners, apartment dwellers, and those testing glaze...
The KS-609 is ideal for beginners, apartment dwellers, and those tes...sting glazes, porcelain and clay bodies. Even though small in size, it has the quality features of larger kilns, including a Dawson Kiln-sitter. Operates on 115V, 20 amp circuit, which means you can use it just about anywhere.
10% off SKUTT Kilns with FREE Shipping!15% off if picked up at Mudworks!!!
Electrical Requirements240 Volts 48 Amps 11520 Watts208 Volts 48 Amps 9980 WattsCopper Wire Size: 6Breaker Size: 60NEMA Receptacle Configuration: 6-50
The newest addition to the skutt kiln line.
Electrical Requirements240 Volts 48 Amps 11520 Watts208 Volts 48 Amps 9984 WattsCopper Wire Size: 6Breaker Size: 60NEMA Receptacle Configuration: 6-50
This is the perfect automatic electric kiln for high production, with nearly 10 cubic feet of loading capacity. For those who fire the same program for many loads, you need simply to load and start one of your six stored programs, and go back to work on your next batch. The KilnMaster will handle all the firing details with truly superhuman precision, ensuring that you will get superb consistency, load after load. If your 1227-3 is fitted with a Skutt EnviroVent, you can plug all the peepholes, program a Delay to start your firing at night, and be there for shut-off and unloading the next morning. You get more sleep, and much more production. Available in three phase models.
Professional performance for small studios.
Now your friendly eight sided Skutt electric kiln can give you precise firing control that was available only on top of the line models just a few years ago. It is a versatile Cone 10 kiln that is a great work tool for porcelain and stoneware artists. Easy to move and economical to operate, the KM-818-3 is the perfect kiln for home studios, too.
Electrical Requirements240 Volts 27.8 Amps 6660 Watts208 Volts 26.7 Amps 5550 WattsCopper Wire Size: 6Breaker Size: 40NEMA Receptacle Configuration: 6-50
Here's How It WorksA designated number of holes are drilled in the lid and floor of the kiln either in the factory or on location. A spring loaded plenum cup (see diagram) is placed under the kiln and tensioned between the floor of the kiln and the floor under the kiln. The holes in the floor of the kiln are drilled in a tight pattern so the plenum cup can cover them all. The other end of the cup is connected by 3" ducting to a fan which is generally mounted on the wall. On the opposite end of the fan the air is ducted through the wall to the outside air. The plenum cup has 3 additional holes from which it draws room temperature air to mix with the heated air from the kiln. This serves 2 purposes. Since the kiln air is mixed with cooler room air the air coming out of the end of the vent is never hotter than an average hair dryer. Secondly, the holes in the plenum cup are sized to reduce the vacuum on the kiln chamber so only a small amount of air is moving through the kiln. This ensures the firing time is not affected and the ware is not at risk.