Description: The Gleco Trap is an innovative, inexpensive solution to messy,
hard-to-use sink traps. The Gleco Trap provides you with an economical
plumbing trap that is easily installed and maintained. The Gleco Trap
is connected below the sink and collects solids in a bottle. When the
solids reach the fill line on the bottle, the excess water in trap is
drained through a valve, the bottle is exchanged with a replacement
bottle, the valve shut and the trap is back in service. Bottle exchange
is rapid and done without the need of tools (less than 2 minutes!).
Most of all, there is no mess and minimal chance of water spillage. Key Benefits of The Gleco Trap
- Adapts easily to existing plumbing, wherever there is a p-trap (U-shaped joint).
- Smaller bottle means less odors generated in, and emitted from, the trap.
- Translucent bottle enables you to see the contents of the trap at any time.
- Fill line easily and quickly shows when the trap needs to be serviced.
- Drain valve allows for all the water above the bottle to be drained prior to removal, eliminating spillage
- Replacing
the bottle takes less than 2 minutes, from start to finish, with no
tools, no spillage, and no risk of coming into contact with the solids
contained within The Gleco Trap.
|