Description: If you're looking for something funky to spice up your glaze selection
try our lichen glazes! This art glaze adds a really fun element to any
pottery or sculpture. Not intended for surfaces in direct contact with
food (can be used on the exterior of functional pottery). Do not add
too much water or glaze will not perform properly. Once applied thickly
enough, it will crackle on bisque, do not touch--fire as is and it will
work wonderfully.
Mix our lichen glazes at a 1:1.5 ratio
with water by weight. Designed for dipping. All our glazes are batch
tested and sold in dry form. White tile is Standard 213, red tile is
Highwater Clay's Earthen Red both fired to Orton Guide Cone 6 in a
digital electric kiln. We recommend fast glaze firing to Cone 5 with a
12F offset and a 2 to 5 minute hold. If using a kiln sitter, use small
orton Cone 6 cones. We do not use Barium, Lead, or Cadmium in the
production of any of our glazes. Always, always, always test new glazes
in your studio before putting them into large scale production!
