VPM-9 Vacuum Power Wedger
(25lb. Max. Batch Size)
"The vacuum deairing Pugger-Mixer"
110V and 220V models available
"When is Peter Pugger going to come up with something small for us single potter studios?"
The VPM-9 has arrived. With all the bells and whistles, and a price
that competes with the standard pugmills, the VPM-9 does it all. Any
clay that has not been fired can be reclaimed in the VPM-9. Broken
greenware, slop, powder and water can be thrown into the pugmill and
reclaimed in minutes. It is that simple. We would like to thank all of
you for your patience.
Shaft, augers and paddles of stainless steel, along with aluminum mixing/pugging chamber, ensures rust-free clay processing.
The oversized hopper door allows for easy loading of up to 25 lbs. of clay per batch.
Batch Mixing Capability:
Full batch mixing and blending capability allows for moisture adjustment before pugging.
Switch to PUG after a batch is completely mixed, and the Power Wedger unloads itself in the form of 3" diameter deaired logs.
Each batch can be deaired by starting the vacuum
pump when the load is mixed. Air is removed during the last stage of
mixing, leaving an air-free product when pugged out. Our patented vacuum design allows us to deair the clay without the use of cumbersome vacuum screens!
Leaving moist clay in the Power Wedger is not a problem. All the openings are sealed so clay will stay moist indefinitely.
Intellectual Mixing Technology:
Real-time monitoring of clay
consistency can be accomplished while mixing. Similar to an automatic
transmission, the Pugger-Mixer can automatically speed up or slow down
based on the hardness of the clay being processed. The operator can
also control the speed by controlling the variable speed knob.
Variable Speed Control:
This allows the operator the ability to
speed up or slow down the pugmill. This is especially useful when
extruding through dies. Because of the back pressure generated by a
large amount of clay being forced through a small orifice, the speed
control allows the operator to slow the pugging as required. In turn,
perfect deaired configurations are easily extruded through the
Pugger-Mixer. There are additional advantages if you are a "single
potter studio". The ability to slow the pugging allows for time to
place pugged clay into containers or bags.
Stainless Work Surface:
The stainless steel work surface creates
a durable work surface for convenience of the operator while loading.
The work surface is 12" x 14".
Peter Pugger now offers a corrosion
resistant model (optional) for potters using porcelain clay bodies with
high alkalinity. Click here for more information "What you need to know about Porcelain"
The Power Wedger is the most
versatile studio clay processing machine on the market today. It can
perform a variety of functions efficiently, transforming clay in any
form to a usable product.
-Mix moist clay from powder and water.
-Reclaim scrap - wet or dry.
-Blend two or more different bodies.
-Add materials (wet or dry) to an already moist body.
-Adjust moisture of an already wet body.
-OR just mix a 25 lb. bag of clay - literally warm the clay by mixing it.
When the clay is adequately mixed, it can be deaired with vacuum and pugged out in the form of logs ready for use.
It is not necessary to continuously hand-feed the Power Wedger as with
standard pugmills. Load a full batch, close the lid and turn it on -
this eliminates exposure to moving paddles. The Power Wedger shuts off
automatically when the lid is opened. All machines are equipped with a
thermal overload for protection against overheating.
Vacuum is provided by a 1/16 HP
double-headed rocking piston type diaphragm pump. These new technology
pumps are the simplest and quietest vacuum source available. They are
maintenance-free and long lasting. The
VPM-9 Power Wedger does not require a large vacuum pump because the
clay is continuously exposed to vacuum in the sealed mixing chamber.
Once the clay chamber is evacuated, the vacuum pump can be turned off.
With the removal of four bolts, the entire
mixing/pugging chamber can be removed so it can be conveniently washed
off. The paddles are then easily accessed for cleaning. Cleaning is
necessary only to avoid cross contamination. Since the machines are
completely sealed, moist clay can be stored indefinitely without drying
Cleaning is necessary only to avoid cross-contamination. Since the
machine is completely sealed, it can be left for long periods of time
without the clay drying out.